Stratum Track captures the prep, the profile, the ambient readings and the film thickness on the step they belong to, and generates the client’s report from them.
Your inspector signs it, the same as he does now. Nothing to send us, and no sales call.
The readings go on a clipboard, then somebody types them into the report that night.
Stratum Track puts your own inspection record on the tablet and your blaster or painter fills it in at the job. The client’s copy generates when the job closes.
Dew point and ambient get taken before every coat, and the numbers live on paper until someone transcribes them.
Your crew records the temperature, the humidity and the dew point on the step they belong to, before the coat goes on, and every reading is stored as data the report can use.
The salt test and the profile check need a photograph, and those photographs arrive later off somebody’s phone.
You mark which photographs the job requires and the step won't close without them, with a guide image showing the shot. They land on the step they belong to, stamped with who took them and when.
A job arrives on a paper docket that goes in a pigeon hole and gets written up later.
Your team raises the job on the tablet at the gate and photographs the docket against it, and does the same again when it leaves.
If one of those is yours, this is what Stratum Track does about it.
See it in action →The wet film and dry film readings against the minimum and the maximum for that coat. The hold point before the topcoat, with the work below it paused until your inspector signs. The photograph the template requires, stamped with the person, the time and the job.
There's also a 90 second walkthrough of Stratum Track.
You may have scheduling, safety and job costing sorted already, with the coating report at the end the last thing still done by hand. Stratum Track does that part. You keep what you run now, and we build it from the report you already issue.
Your NACE or AMPP certified inspector signs the job, and his certificate number sits on the report where it does now. Stratum Track records who signed which hold point and when, so the evidence of who did what is on the job rather than in somebody’s memory.
Stratum Track certifies nothing and holds no accreditation of its own, and we don’t decide what your coating specification requires. We produce the record your quality system already asks for.
Standing up a system like this normally takes weeks of somebody’s time, and that's the part we do for you. AI reads the report you sent and drafts the workflow and the report structure from it. Your people edit it and approve it before your crew ever sees it. Templates move through draft, reviewed, approved and live. Results in a finished report are the ones your inspector recorded, never something the software worked out for itself.
Send us one report you issue today. We build it into a working job inside Stratum Track, with the branded report it produces, and send it back within 24 hours. It costs you nothing.
Show me on my own report →Pick the part that costs you the most time and we'll show you exactly how Stratum Track handles it, using your own record and your own report format. No sales call, and you don't have to send us anything.
Stratum Track is built and run from Perth, Western Australia. The person who reads your report is the person who builds your workflow.